Our runs come in different materials, with or without canopy (3.5 cm thick, side overhang about 20 cm). They are customisable and modular: extend them with more panels, or install them side by side, saving money.
We make them in our own factory, with welded mesh panels, hot-dip galvanised bars or insulated panels in polyurethane and sheet metal. Panels join with 8 mm bolt and nut. Each panel and gate has a 10 mm ring for ground fixing: with 10 mm anchors on concrete, with 10 mm stakes on grass. Assembly is easy, with hardware and instructions supplied.
Runs in 4 materials and 4 sizes:
Welded mesh dog run, with or without insulated canopy: hot-dip galvanised mesh panels with 5 x 5 cm openings and 3.9 mm wire, and gate. Padlock-ready bolt and feet at the base. Clear door opening 77 x 162h cm for the 170 cm high run, 77 x 192h cm for the 200 cm high run. The gate opens outwards, from left to right. Frames in 2.5 x 2.5 cm tubing, 1.5 mm thick.
Galvanised bar dog run, with or without insulated canopy: panels with bars 1.2 cm in diameter spaced 6.5 cm, and gate. Padlock-ready bolt and feet at the base. Clear door opening 57 x 162h cm. The gate opens outwards, from left to right. Only 170 cm high. Hot-dip galvanised. Frames in 2.5 x 2.5 cm tubing, 1.5 mm thick.
Aviary mesh run, with or without insulated canopy: galvanised mesh panels with 2.5 x 2.5 cm openings and 2 mm wire, riveted onto galvanised tubular frames 2.5 x 2.5 cm, 1.5 mm thick, with a 77 cm gate opening outwards, from left to right.
Insulated run with canopy: back and sides in 3.5 cm insulating panels, in polyurethane and sheet metal, framed in galvanised sheet metal. Front in panels and gate in hot-dip galvanised dog mesh, with 5 x 5 cm openings.
Note: in some countries dog runs must meet minimum floor areas and heights, depending on the size of the dog; please check the rules in your country.
SIZE:
200 x 300 x 170h cm
200 x 300 x 200h cm
200 x 400 x 170h cm
200 x 400 x 200h cm
Can be extended as needed
Other sizes on request
See all our dog runs and pens and dog kennels.
Manufacturer: Ferranti S.r.l. – Via Vicinato 43, Frazione Fratta, 06036 Montefalco (PG), Italy – info@ferrantinet.com