- Gates and panels in hot-dip galvanised welded mesh, with or without door, for dog runs of various shapes and sizes
- Mesh with 5 x 5 cm openings and 3.9 mm wire
- Closure with padlock-ready bolt
- Frame in 2.5 x 2.5 cm tubing, 1.5 mm thick, weather resistant
- Clear door opening: 77 x 162h cm for the 170 cm high gate; 77 x 192h cm for the 200 cm high gate
- Opening direction: the 100 cm gate opens outwards from left to right, the 120 cm gate outwards from right to left
- Panels join with 8 mm bolt and nut
- Ground fixing: each 100 cm panel and gate has a 10 mm inner ring, for use with anchors on concrete or stakes on grass
- Assembly: panels are pre-drilled for straight assembly; 90° fixing holes on request
- Custom: state the run size in the order notes, or email us a drawing
Note: in some countries dog runs must meet minimum floor areas and heights, depending on the size of the dog; please check the rules in your country.
SIZE:
50 x 170h cm
60 x 170h cm
100 x 170h cm
120 x 170h cm
100 x 200h cm
120 x 200h cm
Other sizes on request
See all our dog runs and pens and dog kennels.
Manufacturer: Ferranti S.r.l. – Via Vicinato 43, Frazione Fratta, 06036 Montefalco (PG), Italy – info@ferrantinet.com